clutch match up?

[sledheadkevin]

i just bought an 89 (i think) vmax. i am going to put the thing back together but am wondering if the clutches off of an 84 phazer will fit. i just have parts from my phazer that i am hopeing that i can use please let me know also i have been looking for the oil injection on the sled but cant find it im not sure if it has been taken off or not where is it located/ the oil resevior?

[Vmax540]

i just bought an 89 (i think) vmax. i am going to put the thing back together but am wondering if the clutches off of an 84 phazer will fit. i just have parts from my phazer that i am hopeing that i can use please let me know also i have been looking for the oil injection on the sled but cant find it im not sure if it has been taken off or not where is it located/ the oil resevior?

Give me the vin# and I can tell you the year of your sled. The secondary clutch off of an 84 phazer should work but, the primary offset would certainly be different ? The oil pump is on the back right hand side of the engines gear case assembly under neath the radiator and oil tank.

[sledheadkevin]

ok well ill work on getting the vin#. it looks as though the oil pump has been removed i see where it was. so what premix ratio should i run? i usually run a 50:1 in my two strokes or 40:1 what would be best?

[sledheadkevin]

So what are some alternative primary clutches that i can use on this sled. i dont have all the parts for the one that is on it. so i am just looking at what i can put on there so that i can get this thing going on the snow to start out with. hopeing to do more to it later.

[agfirecat]

I bought a vmax parts sled that had a polaris p-85 primary on it you should maybe see if u could score one off of a indy 500 or maybe an xlt i would measure the inside dia. of the back of your primary withh a micrometer and make a note of it when you go to get a clutch .(snowmobile bone yard). i can let ya know what spring and weights are in that clutch if ya want. id sell ya the clutch but it has a cracked sheave.

[Vmax540]

Tons, of reading right here in the Garage forum heck, there is a sticky on clutching......

viewtopic.php?f=2&t=1506

[sledheadkevin]

Hey i was just wondering if a '85-'90 SRV,XLV,535,540 clutch fit on the Vmax? i saw a post for a clutch that im hopeing to buy and hope that it will work.

[sledheadkevin]

another thing if i put an xlt primary clutch on can i put the secondary clutch on as well? will it match up/fit. cuz i know that the belt sizes are different so the stock secondary wont work with an xlt primary will it?