Intrument panel vmax 540 and 81 srx 440e

Get your questions answered here! Also be courteous and answer any you may know. Its a give and take kinda thing, we think you'll enjoy!
Post Reply
arctic srx 500
Posts: 29
Joined: Tue Sep 25, 2007 7:49 pm
Location: Norway

Intrument panel vmax 540 and 81 srx 440e

Post by arctic srx 500 »

What is the diference between those instrument panels? I have seen in the parts manual and wonder what have been changed? I thought they all was like.

81 and 82 has 8m6-77711
83 and 84 has 8u9-77711
85 has 80n-77111
Yamaha- the way it should be
User avatar
tyler440
Posts: 692
Joined: Tue Jan 24, 2006 12:47 am
Location: Clarion, PA
Contact:

Post by tyler440 »

not sure if they are mechanically different but i know the 81 goes to 10000 on the tach i assume the 82 does to... and the guage faces look different... but i imagine they are interchangable
My airbox is held on by one screw, not because Im lazy but because it is less weight!

Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
arctic srx 500
Posts: 29
Joined: Tue Sep 25, 2007 7:49 pm
Location: Norway

Post by arctic srx 500 »

Know that the temeratur gauge changed in 84, but the tach isnt in the instrument panel. I did use the word from the parts manual, but as i would say it is the tank cover.

The tach goes to 12000 at 81 and 82, and the spedo to 120 miles or 200 km/t(mine)
Yamaha- the way it should be
User avatar
tyler440
Posts: 692
Joined: Tue Jan 24, 2006 12:47 am
Location: Clarion, PA
Contact:

Post by tyler440 »

oh the tank cover! hmmmm never really compared those... im thinking after 84 they ditched the tether... and at least in 86 there was the fuel shutoffs on the tank cover... also 86 on would have snaps for the seat cover i imagine... i dont see why you couldnt swap them around if you wanted
My airbox is held on by one screw, not because Im lazy but because it is less weight!

Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
arctic srx 500
Posts: 29
Joined: Tue Sep 25, 2007 7:49 pm
Location: Norway

Post by arctic srx 500 »

Yes you have right. The 80n tank cover has not the hole for the tether. Now i see the difference between those.
The difference between the 81/82 and the 83/84 are the hole in the front of the tank cover, where the rubberflap shall be(over the airbox), and the 85 did not have the hole for the tether.

Thanks Tyler 440.
Yamaha- the way it should be
User avatar
tyler440
Posts: 692
Joined: Tue Jan 24, 2006 12:47 am
Location: Clarion, PA
Contact:

Post by tyler440 »

i try... not always right but im usually pretty close :lol:
My airbox is held on by one screw, not because Im lazy but because it is less weight!

Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
User avatar
Vmax540
Posts: 1521
Joined: Thu Jan 26, 2006 8:36 pm
Location: Shippenville Pa.
Contact:

Post by Vmax540 »

The 85's on up used the T.O.R.S. (carb shut offs) instead of the tether cord !
https://www.youtube.com/watch?v=PFb6NU1giRA
"I prefer dangerous freedom over peaceful slavery." Thomas Jefferson
User avatar
vmax-540
Posts: 299
Joined: Tue Jan 31, 2006 12:34 am
Location: Ogdensburg new york

Post by vmax-540 »

The only difference between the 81 SRX & the 83 Vmax is the hole for the choke cable, the SRX is a little smaller, the decals are of coarse different also..
JEFFERY M FOURNIER

SLEDS
83 VMAX 540
81 SRX 440
arctic srx 500
Posts: 29
Joined: Tue Sep 25, 2007 7:49 pm
Location: Norway

Post by arctic srx 500 »

Is there anybody that have this tankcover? I want to buy one for my srx. it have to be without cracks..
Yamaha- the way it should be
Post Reply