oil pump issue

MAPEX · Post by **MAPEX** » Mon Aug 03, 2009 10:36 pm

Hi Guys,

I have an oil pump for an 80 SRX (8K2), will this work an 81? it looks very similar to the one in my manual, but my cable doesn't seem to be long enough so I'm kinda confused. any ideas would be greatly appreicated.

Thanks,
Mike

Post by **tyler440** » Tue Aug 04, 2009 8:42 am

hey sorry im not answering your questions... the problem is, i dont know.... and since it is the off season everyone is out doing something else... if you wait long enough some that does know will be by and answer your question... like yammiegod3:16

vmax-540 · Post by **vmax-540** » Tue Aug 04, 2009 4:35 pm

The two pumps on the 80 SRX & 81 SRX are different,the 81 is a richer pump, it also has a different cam profile then the 80, so it may inject more or less at different throttle positions then the 80,this maybe because the 81 has 7 main bearings and the 80 only 6, the 81 seems to be a really rich pump even compared to the Vmax pump so you may be able to get away with it. Here are the outputs of the to pumps.
Why not put an ad in this site for an 81 pump ,there were alot of people that took them off and used pre mix you should be able to find one. I hope this will help you out. Also try a Vmax pump that maybe another option.

Yamaha measures them at 200 pump stokes

80 SRX
.95cc-1.19cc at idle
7.84cc-8.89cc at full throttle
81 SRX
1.19cc-1.43cc at idle
8.17cc-9.12cc at full throttle.

Post by **tyler440** » Wed Aug 05, 2009 8:36 am

the pumps actually bolt up to the other motors? i didnt figure they would but i guess i shouldnt be suprised...