Recoil on 86 Vmax

WolverineVmax540 · Post by **WolverineVmax540** » Sun Dec 07, 2008 10:07 pm

I am new to the forum and this forum is very nice and contains a lot of useful information.

Four years ago I got a 1986 Vmax 540. Over the last four years I have had the recoil bottom out three times. Each time I have replaced the recoil spring and this last time I have added extra rope to try and prevent this from happening in the future. I was wondering if any else has had this problem, and if so what they did to correct it.

Thanks WolverineVmax540

Joe · Post by **Joe** » Sun Dec 07, 2008 11:12 pm

I am not familiar with the term 'bottom out' in regard to a recoil starter.

What does that mean?
When does it happen?
What are the symptoms?

Post by **Vmax540** » Mon Dec 08, 2008 10:17 am

I believe you already found the cure ! When I rebuild the recoils I always add another 6-8" this helps to prevent the sudden stop and bottoming of the rope when pulled completely out, this sudden stop, tears up recoils. I'm thinking my rope pulls out at the very least to the curve of the seat which your butt fits into.

WolverineVmax540 · Post by **WolverineVmax540** » Mon Dec 08, 2008 10:28 am

Thank you very much.