Looking for a 540 v-max or a 81 440 srx motor

chrisrider63 · Post by **chrisrider63** » Sat Nov 22, 2008 9:39 am

Looking for a 540 vmax or 440 81 srx motor with carbs , recoil maybe pipes

Rickyamaha · Post by **Rickyamaha** » Sat Nov 22, 2008 2:38 pm

I have two 8m6 motors complete with carbs and pipes and one 8u9 motor complete with pipes but no carbs. I am from Quebec... maybe a little too far for you.

chrisrider63 · Post by **chrisrider63** » Sat Nov 22, 2008 10:30 pm

If we could ship it that would be fine. 8M6 and the other what is the difference??
How much would you want for the one with carbs and pipes??

chrisrider63 · Post by **chrisrider63** » Sat Nov 22, 2008 10:55 pm

I have the same pipes you have in the picture of the motor theyre labeled 8M6 and the
clutch is labeled 8M6 are these for the 81 440 SRX??

mrvmax83 · Post by **mrvmax83** » Sun Nov 23, 2008 1:54 am

I Have a set of 83 V MAX PIPES complete with Exh Canister and springs in good cond. I live in Mn.Im asking $125.00 FOR EVERYTHING,give me a call if interested,(ask for Eric)651-503-0869.Thanks for your time.

Rickyamaha · Post by **Rickyamaha** » Sun Nov 23, 2008 9:47 am

8m6 is for 81 srx 440 and 8u9 is for the vmax 540.

chrisrider63 · Post by **chrisrider63** » Sun Nov 23, 2008 1:24 pm

I have pipes for the 81 srx and a clutch that has a stamp on it that says 8M6 (primary) I probably couldnt use the pipes on a 540 motor but what about the clutch. Also what would the power difference be between the 440 and the 540. If i cant get a motor in my price range Ive got a 79 srx 440 the whole sled is $300 US so i wanna put it in the 81 chassis because im a bigger guy and the 81 srx is nice and big for me. Thanks for all the help guys!!!

chrisrider63 · Post by **chrisrider63** » Sun Nov 23, 2008 1:29 pm

Since i have the pipes and clutch for the 440 srx rick how much would you want for the 81 srx with the carbs?? Also I have the mecanizism for the oil gauge that goes into the
oil can it has a bare wire on the bottow do i just drop it in the oil can like that??

chrisrider63 · Post by **chrisrider63** » Sun Nov 23, 2008 1:36 pm

Also guys I have a set of mikuni carbs on it that say 440 SX I dont know if i could put
these on the srx or not?? The motor thats on the srx is a kawi or something i took it off and its got the water pump at the back of the engine and the heads look goofy.

Joe · Post by **Joe** » Mon Nov 24, 2008 12:18 am

Can you post a photo?

chrisrider63 · Post by **chrisrider63** » Mon Nov 24, 2008 1:41 am

Ya i will sure

chrisrider63 · Post by **chrisrider63** » Mon Nov 24, 2008 6:00 pm

The carbs say 38 on the side of them where they attach into the cylinders so im assuming 38 round slides??

VintageVmax.com

Looking for a 540 v-max or a 81 440 srx motor

Looking for a 540 v-max or a 81 440 srx motor

WINDSOR, ONT

8M6

V MAX EXHAUST PIPES.....1983

8M6 parts

Re: RICKYAMAHA

81 srx 440

carbs

38 round slide