Page 1 of 1
clutch puller
Posted: Fri Aug 15, 2008 8:58 pm
by agfirecat
anyone know where to buy a puller for the 81 srx w/ the comet 102 ? a part# would be helpful to thanks
Posted: Sat Aug 16, 2008 1:37 am
by Joe
What threads are in the clutch?
I have seen 18 mm, 5/8 and 3/4 threads in the clutches.
I have pullers for all three and can post the source of each.
Posted: Sun Aug 24, 2008 1:55 am
by Joe
Here is an image of my 18 mm puller.
The 5/8 and 3/4 inch pullers are the same except for the threads.
I should have used a tripod or more light.
Posted: Wed Aug 27, 2008 1:00 am
by Joe
The best chart I have seen online for selecting a puller is at:
http://www.staryamaha.com/chart_image.a ... 7707%2Ejpg
I believe it is from the Western Power Sports catalog.
Part number 11-1086 is about an inch too short to pull a VMAX clutch.