Page 1 of 1
Gear case complete with seals/pump shaft needed
Posted: Fri Jan 18, 2008 2:44 am
by flatsix
Looking for a complete pump gear case for my 83 vmax--mine has a bad seal on the impeller(leaks coolant into the case), can't find a replacement. Would prefer one from an 84 or newer so I don't have to deal with the same problem again. Would like complete with all seals, bearings, pump shaft, etc.
Here's what I am looking for:
Posted: Sat Jan 19, 2008 12:18 am
by jipcee
93101-25121-00
93102-20108-00
93103-25146-00
Are any of these the the part # you need?
If so they all show available here:
http://www.stadiumyamaha.com/pages/part ... fault.aspx
Also a good place to find part #'s here:
http://www.yamaha-motor.com/sport/myyam ... there.aspx
Posted: Sat Jan 19, 2008 3:08 am
by flatsix
No, unfortunately the one I need is unavailable from Yamaha, and I have not been able to locate a suitable replacement through local bearing/seal dealers. Thanks for trying though!
Posted: Sat Jan 19, 2008 7:58 pm
by jipcee
Do you have the original part # of the part you need?
Posted: Sat Jan 19, 2008 8:37 pm
by flatsix
Part I need the MOST, the oil seal: p/n 93103-25133-00 --this is the one that is no longer available.
I also need a new bearing, p/n 93316-00101-00 .....these I think are still available, but I have not ordered one yet since the seal appears to be hopeless.
Posted: Sat Jan 19, 2008 9:12 pm
by jipcee
It looks like this place might still have one.
I would call them to make sure.
http://www.loomiscycles.net/ecbasket.as ... JPMQ1887R0
v max seal
Posted: Sun Jan 27, 2008 11:24 am
by sxr1000
Yamaha changed the part # to 93103-25146, have you tried that one?
Posted: Sun Jan 27, 2008 1:20 pm
by flatsix
That part number is for a 84 or newer, which I believe has a different design gearcase. Can anyone confirm this?
Posted: Sun Jan 27, 2008 1:32 pm
by jefflanthier
Whats so special about the seal why is it hard to get any idea,s. theres gotta be a seal out there thaT would fit . or am i dreaming