86 Vmax Resto

[mathis]

Found new crank bearings. Until the engine is rebuilt i have lots of work left on the frame.
Started grinding rust from the frame.

There are lots of great info on that thread, but not the particular info i was after. namely what Koyo/SKF bearing fits the crank....

[mathis]

What bushing is supposed to be on the pivot arms?
There is some slop without any bushing.

[mathis]

Anyone?

[Bob Vehring]

Sorry, I got Pol. extra 10's in mine. Should be easy enough to turn up on a lathe if you can't find them

[mathis]

I have two shims on the oil pump, how many shims are you using on your oil pump?

[mathis]

Where is this band supposed to be?

[mathis]

Unsure about the wiring for the hand warmers. There is a yellow/black and a black wire coming from the wire harness. The hand warmers connectors are all black.
Any suggestion how this is supposed to be connected?

[mathis]

This forum seems very dead... But i found out through my pictures the rubber bands are for the external gas sylinder on the skid shock.
The yellow/black wire is for left hand warmer.

[Vmax540]

viewtopic.php?f=2&t=1529 Look at (-handwarmer installation)