Page 1 of 1
Need help with nozzle identification?
Posted: Wed Apr 04, 2012 6:42 am
by winterthunder
Can some help me identify what this nozzle is for? Its #6 on the exploded view of the pump drive gear housing. I am in the middle of replacing all fuel/oil lines on my 86 max restoration and this did not have anything attached to it. My shop manual doesn’t identify it at all other then calling it a nozzle.
Re: Need help with nozzle identification?
Posted: Wed Apr 04, 2012 8:08 am
by opsled
I think you are talking about the small elbow on top by the serial #. If so that is just a vent for the gear case. Nothing was attatched to it from the factory. Make sure it is open to prevent preassure buildup in the case. You could run a vent line off of it like they do on a Mic carb but it really isn't needed.
opsled
Re: Need help with nozzle identification?
Posted: Wed Apr 04, 2012 3:19 pm
by winterthunder
Thanks Opsled that’s exactly what I was referring to.
Re: Need help with nozzle identification?
Posted: Wed Apr 04, 2012 11:08 pm
by YAMMIEGOD 3:16
phil, i need one of those, you have a extra. 3:16 (yammie tony)
Re: Need help with nozzle identification?
Posted: Thu Apr 05, 2012 4:53 am
by opsled
YAMMIEGOD 3:16 wrote:phil, i need one of those, you have a extra. 3:16 (yammie tony)
What Tony, That elbow?
I have all that stuff,
Let me know. We'll fix ya up.
opsled
Re: Need help with nozzle identification?
Posted: Thu Apr 05, 2012 10:30 am
by YAMMIEGOD 3:16
YES, THAT SMALL CASE VENT ELBOW. YES PLEASE IF YA HAVE A EXTRA. I KNOW YOU HAVE MY ADDRESS. 3:16 (YAMMIE TONY)
Re: Need help with nozzle identification?
Posted: Thu Apr 05, 2012 12:37 pm
by opsled
YAMMIEGOD 3:16 wrote:YES, THAT SMALL CASE VENT ELBOW. YES PLEASE IF YA HAVE A EXTRA. I KNOW YOU HAVE MY ADDRESS. 3:16 (YAMMIE TONY)
On it's way Big guy.
opsled
Re: Need help with nozzle identification?
Posted: Thu Apr 05, 2012 12:55 pm
by YAMMIEGOD 3:16
LOVE YA BRO. HEY BY THE WAY, YOUR HEAD WORKED GREAT. AROUND 145 psi. 3:16 (YAMMIE TONY)
Re: Need help with nozzle identification?
Posted: Thu Apr 05, 2012 2:53 pm
by opsled
Cool,,,
Got it runnin yet??
opsled
Re: Need help with nozzle identification?
Posted: Fri Apr 06, 2012 5:51 pm
by YAMMIEGOD 3:16
LET YA KNOW 9 MONTHS FROM NOW 3:16 (yammie tony)