Hey guys,
Here you go, Spring Sale...I've unloaded most of my older sleds in time for spring. This is a 1981 Yamaha SRX 440 and since I've already finished my own project I'm ready to unload the rest of my SRX parts. The chassis is in pretty good shape but could use a good cleaning. The seat is firm and would be very usable if recovered. I also have enough parts to make a complete sled so if you want or need anything just email me and I'll shoot you a picture and price. I have a few NOS parts left as I've been passing those along as well.
I'm between Elmira and Binghamton in NY 14892 and will ship just about anything so don't hesitate to ask.
Email is the best way to get in touch with me: palanza27XXX@gmail.com - just remove the XXX from the email.
81 SRX 440 Parting Out
81 SRX 440 Parting Out
Last edited by MAPEX on Sun May 22, 2011 9:28 am, edited 3 times in total.
Sleds:
2007 Yamaha Apex RTX
2 - 1981 Yamaha SRX 440's
2007 Yamaha Apex RTX
2 - 1981 Yamaha SRX 440's
Re: 81 SRX 440 Parting Out
Following parts are sold: As of 5/26
Crank (still have the Case available)
Fuel Pump (still have 1 available)
Ignition Coil
CDI (8R9) (still have 2 original issue boxes available)
Stator (still have 2 original issue 8M6 available)
Flywheel (still have 1 available)
I just ask that if you tell me that you want/need a specific part and after I take it off and send you pictures and you once again say you'd like them....that you BUY it instead of wasting my time. Also, if someone else may need that specific part I can say it is still available. I know this doesn't apply to most people but there are a few who it does. I apologize for my ranting but it's just irritating on this end.
Thanks,
Mike
Crank (still have the Case available)
Fuel Pump (still have 1 available)
Ignition Coil
CDI (8R9) (still have 2 original issue boxes available)
Stator (still have 2 original issue 8M6 available)
Flywheel (still have 1 available)
I just ask that if you tell me that you want/need a specific part and after I take it off and send you pictures and you once again say you'd like them....that you BUY it instead of wasting my time. Also, if someone else may need that specific part I can say it is still available. I know this doesn't apply to most people but there are a few who it does. I apologize for my ranting but it's just irritating on this end.
Thanks,
Mike
Last edited by MAPEX on Tue May 31, 2011 2:20 pm, edited 5 times in total.
Sleds:
2007 Yamaha Apex RTX
2 - 1981 Yamaha SRX 440's
2007 Yamaha Apex RTX
2 - 1981 Yamaha SRX 440's
Re: 81 SRX 440 Parting Out
Please....viewtopic.php?f=2&t=585
https://www.youtube.com/watch?v=PFb6NU1giRA
"I prefer dangerous freedom over peaceful slavery." Thomas Jefferson
"I prefer dangerous freedom over peaceful slavery." Thomas Jefferson
Re: 81 SRX 440 Parting Out
Hey guys,
The Bulkhead and Skis have been taken as well. Tunnel is still available
Thanks,
Mike
The Bulkhead and Skis have been taken as well. Tunnel is still available
Thanks,
Mike
Sleds:
2007 Yamaha Apex RTX
2 - 1981 Yamaha SRX 440's
2007 Yamaha Apex RTX
2 - 1981 Yamaha SRX 440's
Re: 81 SRX 440 Parting Out
Do you have the front oil tank support and shield?
Re: 81 SRX 440 Parting Out
Just wanted to let everyone know that there are still many parts from this sled available. I sold my last SRX and am ready to finish unloading these parts and aren't looking to make much on any of them so just shoot me what you want and an offer and we'll work from there. Thanks
Mike
Mike
Sleds:
2007 Yamaha Apex RTX
2 - 1981 Yamaha SRX 440's
2007 Yamaha Apex RTX
2 - 1981 Yamaha SRX 440's
Re: 81 SRX 440 Parting Out
Just wanted to let everyone know that the majority of this sled has been taken except for a few pieces here and there...handlebars and pod covers, exhaust, and original stator. Thanks for all the emails and purchases.
Mike
Mike
Sleds:
2007 Yamaha Apex RTX
2 - 1981 Yamaha SRX 440's
2007 Yamaha Apex RTX
2 - 1981 Yamaha SRX 440's