VintageVmax.com

Merry christmas everyone. I am trying 2 find a used knuckle for a 1994 vmax 600 and dont wanna haveta pay 4 a new one. I have tred every used sled part site I can find and have had no luck. Hopefully one of u guys can help

http://cgi.ebay.com/ebaymotors/94-96-YA ... 27b787c933

As my article states..... chances are any used assemblies will be frozen as well and the best you may do is remove to the assembly and soak in a pan of PB Blaster or other penetrating fluid ?

viewtopic.php?f=2&t=1529
T.S.S. Maintenance
On every used T.S.S. sled I've bought the Knuckles and steel bushing are almost frozen or completely locked up and pivoting on the bolts ! I've bought sleds that the locked up joints won't even allow the springs to return let, alone the struts to work when hitting a bump. The T.S.S sleds have always gotten a bad rap for slop developing when the ungreased steel bushing's freeze up they grind away on the nylon washers ! I have sleds that are 15+ years old that have never had a bushing kit and are almost as tight as new. Just take the knuckles and the ski mounts apart every other year and grease !
Shim Kits http://s15106.50belowcommerce.com/produ ... oducts=tss
http://www.mfgsupply.com/m/c/100-650.html
http://www.schmidtbrosmotorsports.com/y ... -parts-vx/

I should have been a little more clear on my dilemma. I have rhe assemblies apart but the right hand knuckle is cracked down the front and i am not comfortable using it. Sure doesnt look safe. That would be the reason I am lookin 4 a new one.

I have the parts you are looking for. They are for the standard Vmax not the XT just to be clear.

my email is nlantto@charter.net send me an email or a pm for my number and you can call.

Speed