Want to buy one mid 80's XLV skid frame
Posted: Mon Aug 30, 2010 2:49 am
I am currently using two VMAX skid frames in my half track snow rail (http://www.youtube.com/watch?v=Gyun4WAS37c) and need to carry the weight higher.
Both VMAX shocks are full tight and the bottoms of the tunnels are still unacceptably close to the ground.
If you watch the video at 4:10 it shows how low the front sprockets run to the ground.
I have one skid frame that was on a XLV with a double seat that seems to ride a lot higher than the Pro-action skid frame from the VMAX.
If the XLV skid frames work out, the VMAX skid frames will be available.
Both VMAX shocks are full tight and the bottoms of the tunnels are still unacceptably close to the ground.
If you watch the video at 4:10 it shows how low the front sprockets run to the ground.
I have one skid frame that was on a XLV with a double seat that seems to ride a lot higher than the Pro-action skid frame from the VMAX.
If the XLV skid frames work out, the VMAX skid frames will be available.