VintageVmax.com

Posted: **Thu Nov 26, 2009 4:02 pm**

can someone give me torque specs for a 540 vmax the jugs,and the cylinder head. Just starting a restoration on a 85 my local dealer doesnt have any info they pitched it it in the dumpster!!

Posted: **Thu Nov 26, 2009 5:06 pm**

CYLINDER HEAD TIGHTENING TORQUE 10 MM NUT FIRST 14.5 FT LB FINAL 21.5 FT LB AND 8MM BOLT FIRST 14.5 FT LB FINAL 18 FT LB. ALSO THE HEAD NEEDS TO TIGHTEN IN SEQUENCE