Page 1 of 1
Rear bumper covers
Posted: Sun Nov 22, 2009 2:11 pm
by Bob Vehring
Are there just 3 pieces or is there end caps that went on the back part. I have two sides and a rear piece, the rear looks like either someone cut the ends at a 45 deg angle, or maybe there's some end caps I don't have. What I have now leaves the edges exposed
Posted: Sun Nov 22, 2009 6:21 pm
by opsled
3 pieces Bob. Your's must be cut.
opsled
Posted: Tue Nov 24, 2009 9:59 am
by Vmax540
Posted: Tue Nov 24, 2009 12:44 pm
by Bob Vehring
Thanks, but wow 90 bucks for a piece of plastic
Bumper
Posted: Tue Nov 24, 2009 1:46 pm
by velocity
Hey Bob,
Give Al's snowmobile a call. I got one for my 86 three years ago and it was only like $25.00... worth a phone call..
George
Posted: Tue Nov 24, 2009 10:44 pm
by Bob Vehring
My other yammi is a "81 srv which had a different tunnel. In '83 they switch to what looks to be this style. So my question is are all these the same, VM, SRV, Phazors ect ?
Posted: Thu Nov 26, 2009 8:56 am
by opsled
All these rear bumper components on Vmax 540's, 83 and up SRV's and late XLV's carry the same 8M6 "81 SRX" prefix and part #'s in online Yamaha parts books. So the answer is Yes, they can be found on these other models. Phazers were different.
Good Luck,
Phil (opsled)
Posted: Thu Nov 26, 2009 9:09 am
by Bob Vehring
Thanks Phil
