VintageVmax.com

looks great i have a 85 also and a 84 parts sled i belive i may still have a rear bumper and im in northern mi also

Yes a exciter 570 will work but there is some Modding to be done if u use a exciter 2 engine

we 2 are done in the far northeren tip of lower michigan there's still plenty in the up on the lake superior side

i wasn't on the wi side of it but it's good on mi side far west by wi it was getting really soft but there was plenty of it

really hu my primers are where the fuel shut offs should be !

it sounds to me like maybe the floats are out of adjustment

i would start by pullin your carbs and cleaning them thourally check and make shur the needle and seat work properly and check to see if your floats float or not if so then they are probably just outa wack

well went take it for a ride last night and the lights worked great for about 8 miles then it went back to come and go all lights would come and go as they pleased so i turned around and sent her home as im looking for breaks in wires i find steam coming from under the motor ? buy the oil pump? it's...

well i finally got this bad lad back togather i still need to do the widening of the front end and swap ski's we haven't had enuf snow to even think about riding for the last month here in north east mi so i had some time to start building this project! last week i got the motor all back togather an...

i have a whole 86 skid minus a few bogey's i will part it out if u want the shock & spring shoot me a offer i'll ship it to if u would like. im in far northern mi let me know i'll post u up some pics

i took 1 out of a 94 polaris xc 500 worked great the right length are you saying that if i get one from a 94 polaris xc 500 that it will fit the yamaha gears in the chaincase?!? because that would be totally awesome.... i know delaughter does sell them but they are really expensive... and like ever...

i took 1 out of a 94 polaris xc 500 worked great the right length and size spline keep in mind with adding the overdrive secondary u might need to change your gearing as well i was able to go up 3 teeth on the top gear withou loosing bottom end

so far all ive used it for is ice drags its set up for oval racing yet and they don't do much of that around here any more but the i-500 is coming up fast this motor makes unbelivable smooth power range i only have about 4000 rpm usable power the way its setup clutch engages at 5200 so the m-10 will...

hey guys a few years back i picked up a 85 v-max that was used as a oval track sled so its had a verry hard life well the motor was suposed to be fresh .60 over but as ive found most of the time peps talk trash so i pulled it apart it's 77mm bore way over .60 over!! who ever ported it did a exellent...

i know marine engines do not like ethanol it plugs the filters and injectors it's ben a big issue around my parts nobody likes to have there jet ski or salmon boat stall out 10 miles or better from shore do to the fuel sluggin up :evil: so most marina's have straight gas no ethanol marked on there p...

im running a .750" aggressor with 144 1" ice picks in my 85 works great haven't had any issues in 2 years