VintageVmax.com

THE SLED SOLD thanks for all the help on htis site over the years!!

i will try to post pictures this week of my sled if you have any interest you can call me 330/571-4668

Hey guys, I have a 81 SRX 440E that I have had for years and am considering selling it, thought i would post to see what the interest was. The sled is in excellent mechanical shape, and very good cosmetic shape. I went throught the motor last fall and replaced the bearings, as the main seal had star...

I used heat to expand the gear and it came right off the crank. hope this helps

Pipes are stock, and yes it is an 81 srx!

engages closer to 5K and revs out around 9K. I Have not weighed the cam arms to determine exactly what they are and how closer they are to specs. My manual show that top RPM is 9250???? thanks again

thanks tyler, i have the comet 102C on the sled and the secondary is stock. I intially set the clutches up with the belt I had (STOCK 1080) giving myself 1 and 1/4 inch deflection to detrermine center to center. I prolly need to make a tool to get this more accurate, and the offset on the money. sle...

Hey guys I was wondering how important the offset is when aligning the primary to the secondary. I smoked a couple belts the other night and not real sure what the issue is. I set a straight edge off back of my primary and then measured roughly a half inch off the straight edge at one side of the se...

will do, Ill take some for ya guys and post them up

Thanks for all your help in getting this sled up and running again. Wow! what a ripper for an old sled. After about 3 yrs of restoration and problem solving FINALLY it is running well and strong. Now on to the finite tuning of clutch, carb, suspension, so on and so on. Thanks again for everyones inp...

Have an 81 srx with mikuni B40-38 carbs on it, wondering where I can find a rebuild kit for these carbs. thanks

The CDI is the updated CDI 8R9 which if I understand it correctly was the CDI intially for the 82 srx 500 which ran fine couple yrs ago? Anyways have a little more information to mull over after last nights wrenching session. pulled and pulled and nothing, so I took the expansion chambers off and su...

Well guys here I am a year later and no fire. I have replaced the seals in the bottom half, looked like the one side was defineltly leaking. Replaced the pistons and rings installed properly arrow twards exhaust side and ring openings tward intake side, cleanded the carbs and set them. Plenty of rea...

Thanks for the info

I saw several on ebay