VintageVmax.com

Had that most of the week here in Wi. now its starting to turn

I just got back from up on Lake Supiorer, in the 20's at night

Holy Crap, just checked, my VooDoo MAX thread in the My Projects section is at 95,146. If it gets to 100K do I get my picture on the page?

Worked good for me, remembered my name and password, now wake up Chuck

I just went to auto parts store and got a replacement bulb thats the same as a 1157

Just looked, 15 more "views" to hit 60, 000, holy crap

Phil and Steve were there, they have there's apart, waxing the belly pan LOL, seriously theres is one of the nicest looking sleds I have seen

Had the V Max out the last two weekends on the ice, First one was a 1000 ft, ran 87.5, was spinning the track about half way. Fri night I put in a 1/2 in lug track and took out the 1 in one which had 1 1/4 in picks. the new track has about 175 1 1/4 in picks, Had 192 but had to take out some to clea...

BTW, made some small changes to my 83 V Max, had new domes made, now has 15.5/1 and I can't pull the rope when its cold LOL, little more port work. Never got it out again during grass season, hopefully going to NSSR race Feb 8th with it.

Did you have to angle the engine more to get the carbs to clear?, I'm putting a 617 in my drag sled chassis and had to change everything up front to get the carbs to clear the tunnel and steering post. Got that close now, waiting for new rear skid to be finished, all wheels no slides.

Come on Jeff, find a grass drags out there somewhere, I waiting to hear how it does

Any updates Jeff? Looking at mine, Perry and I were talking, IF we could spread out the bolts a little wider, we could go to a triple ex port. Might chase that a little further over winter

Wow, nice to see this site up and running again,Everytime I checked I got a "Virus Warnimg" page and couldn't get on. Heres some updates on the 83 from the last couple years, Sled had been flawless for both a few races and some trail riding for the last two years. Were lucky here to have a...

I haven't tried a Cat pri. I do have a P85 Pol on my 83. Most things simply count on geting the center to center right and the alignment. I made a shim to go over my taper, sometimes the engine and/or sec. can be moved around to get things right. The next thing to watch is if you move to a wide belt...

Good we need to pump some life into this place I took the xtra 10 skid out of mine built a skid just for drags out of a Pol 400, hac 15 wheels in it and is 16 lb's lighter the the 10 in one also tied down the ft end and have just been using it for grass drags. I 500 ft it has been beating my kids VM...