VintageVmax.com

Sounds like it is running rich on one or more cylinders. Check that all 4 floats float at the same height. These are famous for getting fuel logged. Check to see that the fuel pump diaphragms are not cracked and letting fuel run into the case.

What did you end up doing with the swaybar?

The first Southern NH Snow Slickers vintage ride is in Auburn NH February 6 2011. 10, 20 and 30 mile loops on our groomed trail system. Food available at the clubhouse all day. Arrive at clubhouse at 8am. See http://www.snowslickers.org for directions under "Information". Ride leaves at 9a...

Add horsepower to your redhead triple! The best pipes for the Vmax 700 and 600. Good condition, no dents or rust. Complete with manifold connectors.

Sold new for $800. Buy today for $395

email tmfinn13@aol.com or call 603-886-9768

Set of 1983 skis complete with rubber ends and original decals.

Keel bottoms need to be repaired.


$50 for the set.

84 and 85 Vmax hoods

Have some cracks and scratches.

84 has a piece missing where the hood strap would attach.

85 has a piece missing on the right of the steering column.

$100 each

tmfinn13@aol.com

Litchfield, NH

Charles: Thank you for the offer. I haven't decided if I can weld the old muffler or cut up and reweld the Vmax ones to fit. I have been out of work, so I cannot have it done outside. I am going to try some welding this weekend. When I decide which way I am going to go, I will let you know. I also h...

Are you going to stay with the 440 or are you going to make it a 540?

I put them on every TSS sled I have had. They do not make the front stiffer over bumps as the skis are moving together and the bar is not stopped from rotating by the chassis. The bar moves as the skis move. It will make a big difference in cornering. It reduces body roll and helps keep the sled fla...

The New Hampshire Snowmobile Museum Association is having a vintage only swap meet in Allenstown NH, June 5.

For details see http://www.nhsnowmobilemuseum.com/2010swapmeets.php

Has anyone tried just filling the clutch with grease or oil and then turning in a bolt with threads matching the internal on the clutch? I have a 80 SRX with a yamacomet and the dealer stripped the outer threads trying to get it off. I was going to try the grease method. I also have read about filli...

I am helping a buddy repair a 1972 Sno-Jet SST 440 fan with bogies. The stock exhaust is rusty dust. I thought of cutting and rewelding some Vmax pipes I have to match the expansion chambers used on the mod machine shown (NOT the one we are working on) or the Yamaha SS433. Anyone have a set of the c...

Remove the sensor from the hose fitting, and warm it with a heat gun or pass the flame of a lighter under it. If the needle moves, it is working. You can also put it into boiling water at 212.

The Weare Winter Wanderers are having this event.
There will also be a radar run.
To run in the vintage class you must have leaf springs, but we can run in the stock class against the 600's.

More info at http://www.nhhillclimbchallenge.com/

Ride, race or restore!
1980 Vmax, Original Registered as antique in New Hampshire.. Good shape, $1,500.
Have parts sled also available.
email tmfinn13@aol.com for pictures taken last weekend.