VintageVmax.com

If you are able to take some color pics and measurements of your 87 Max existing decals they will reproduce them and in turn sell them to you at a discounted cost. That’s all I did was hold a ruler up to each side of the decals to be reproduced and they can see the measurements for themselves it mak...

I worked with a vintage snowmobile graphics shop ACdecals.com (acdecals@afegraphics.com) this past summer there out of Canada I needed to reproduce the graphics for my 86-Max restoration. These graphics are perfect and yes there reflective if you check out the sight you might not see the whole set f...

I did need both and ended up ordering it so thanks for the help. I ask them witch one of the two that was and it’s the rear shock. did you replace the front one? If you did where did you find it?

Can someone help me with a resource or model year that would be a fit for my 86 I did see 94 was mentioned but wasn’t sure witch models skid would have the same dimension front shock.

Jeff

Thanks Opsled Got it! With only 1,100 original miles on this sled I didn’t have to do much to get the engine ready to fire manly replace lines fuel/oil, clean carbs and check the specks. Now the frame/tunnel has been painted and the belly pan, hood and side panels are all in for prep and paint. Stru...

How do I determine witch carb is left and which is right on my 86 I dont see it marked Anywhere? Previous owner had them off the sled when I picked it up. I will be checking to make sure the jets are the size they should be according to the manual. Just wondering if that’s what you guys are going wi...

I just printed your instructions out and will try it this weekend. You did mention the bleeder screw location before so I figured that would be the first place to start but I would have been lost after that. My tank is empty so I will premix only a gallon and remove the rest after conformation of fl...

I’ve run all new oil lines and now will have to prime the system . Can someone give me some help on the best way to accomplish this? Also should I run a mix with my first tank to make sure oil is mixing as it should

Great I will definitely go with the OEM yellow and yes I was about to use fuel line. Thanks again Opsled this is the second issue you have helped me with this week and it is greatly appreciated.

I am routing new oil lines on my 86 max starting at the reservoir. I have a shop manual and can identify the direction where they go but my question is the nozzles/nipples at the bottom of the reservoir look to be two different sizes witch isn’t identified in the book should I be running two differe...

Thanks Opsled that’s exactly what I was referring to.

Can some help me identify what this nozzle is for? Its #6 on the exploded view of the pump drive gear housing. I am in the middle of replacing all fuel/oil lines on my 86 max restoration and this did not have anything attached to it. My shop manual doesn’t identify it at all other then calling it a ...

:?: Can someone tell me what the nitrogen PSI range is for my 86 max restoration and are they charged at the pin hole on the bottom of the strut? I’ve called a local Yamaha dealer and they are willing to charge them for me but didn’t know the amount to charge them to. Also has anyone had an older st...

Would the fuel tank off an 81 SRX be the same configuration as an 86 max Thanks Jeff

I am in need of a set of side panels what kind of condition are they in and how much wood you want for them?