Disclaimer……. I have parted many Vmax 540’s and the following is a list of my parts! The sleds, I have chose to part out have all been abused and ran hard. Condition is very much debatable and with that said, I will Not sell you junk and if you are not satisfied with any part simply return it and I will give you a refund Minus the shipping charges. The parts will be reasonably clean and useable but, will not be N.O.S. (Unless noted) and they may have nicks, scratches ect. If I have listed multiples of any one part I Will give you the Best one I have at that time. I am doing this because, I enjoy this sport and love to see some of the old iron brought back to life not because I want to get rich (which will never happen restoring sleds)! I have many Shrouds(7) in various condition and find them nearly impossible to ship with their size so, come to my residence look them over and take the one home that meet your needs. I have 15 plus side panels and not one is perfect and they range from a 3 to a 7 on a scale of 1 to10. I have many rear suspensions and or any rear suspension part you need. This list is not complete and I will try to update it often. Prices and parts available subject to Change! I can send digital pictures of parts if need be. Thanks Chuck Schettler cccsche@gmail.com or contact me in the forum (vmax540)
| Description | Part # | O.E.M/Aftermarket | New/Used | $ ea. $ | QTY |
| Windshield smoke 13" | 450-618 | Sno-Stuff | N | 35 | 3 |
| Windshield Clear 11.5" | 450-617 | Sno-Stuff | N | 40 | 1 |
| Windshield Clear 10.5" | ? | ? | N | ||
| Shroud Hinge Left | 8M6-77140-01-00 | OEM | U | 5 | 8 |
| Shroud Hinge Right | 8M6-7714A-01-00 | OEM | U | 5 | 8 |
| Stator Plate 6 wire | OEM | U | 60 | 2 | |
| Stator Plate 7 wire | 80N-85510-10-00 | OEM | U | 100 | 3 |
| Control unit | 80N-85590-10-00 | OEM | U | 10 | 3 |
| Rotor Magneto | 8X6-85550-10-00 | OEM | U | 25 | 3 |
| CDI 8 Wire TIA01-43 | 8U9-85540-10-00 | OEM | U | 65 | 3 |
| Ignition Coil | 8U9-82310-T0-00 | OEM | U | 15 | 3 |
| Voltage Regulator Assy | 82F-81910-A0-00 | OEM | U | 8 | 3 |
| Main Switch Assy. With Key | OEM | U | 12 | 3 | |
| Starter Recoil | 8M6-15710-04-00 | OEM | U | 40 | 4 |
| Case, Starter | 8M6-15711-04-00 | 25 | 2 | ||
| Pawl kit | Aftermarket | N | 10 | 2 | |
| Carburetor intake Manifold rubber flange | 8A8-13555-01-00 | OEM | U | 10 | 8 |
| Carburetor Assy. 1 85up | 83X-14101-00-00 | OEM | U | 40 | 3 |
| Carburetor Assy. 1 83-84 | 8U9-14101-00-00 | OEM | U | 40 | 3 |
| Cable Throttle 1 | 8X6-26311-00-00 | OEM | U | 10 | 3 |
| Cable, Brake | 8K4-26340-00-00 | OEM | U | 5 | 3 |
| Choke Cable | Complete | OEM | U | 10 | 3 |
| Cylinder Head | 8U9-11111-00-00 | OEM | U | 45 | 3 |
| Cylinder Chrome 95%+ | 8U9-11311-00-00 | OEM | N ? | 175 | 1 |
| Cylinder Chrome 85%+ | 8U9 | OEM | U | 100 | 4 |
| Cylinder Chrome 75%+ intake porting | 8U9 | OEM | U | 75 | 2 |
| Cylinder Chrome 65%+ | 8U9 | OEM | U | 75 | 1 |
| Cylinder Sleeved std. | 8U9 | OEM | U | 50 | 1 |
| Cylinder Sleeved std. some porting | 8U9 | OEM | U | 50 | |
| Cylinder Oversized to 1.5mm | 8U9 | OEM | U | 40 | 2 |
| Cyl.Sleeved std. needs bored to ? | 8U9 | OEM | U | 20 | 1 |
| Piston 8U900 | 8U9-11631-01-94 | OEM | N | 70 | 2 |
| Piston 8U900 w/rings & pin | 8U9-11631-01-94 | OEM | U | 60 | 1 |
| Piston 8U9 | 8U9-11631-01-94 | OEM | U | 25 | 1 |
| Piston w/rings, pin & bearing | 009-816 | After market | U | 25 | 1 |
| Piston w/pin, clip & bearing | 009-816 | After market | U | 22 | 1 |
| Piston | 009-816 | After market | U | 20 | 1 |
| Piston w/ringsR09-816 & pin | After market SPI | N | 45 | 2 | |
| Piston w/rings,pin & c clips | 9816 | A.M. LLP | N | 45 | 2 |
| Piston w/rings #R09808 | 09-808 | A.M. Lemans | N | 2 | |
| Piston w/rings, pin & c clip | 844-0816 | A.M. Kimpex | N | 45 | 1 |
| Crankcase Assy. Top & Bottom | 8U9-15100-00-00 | OEM | U | 25 | 3 |
| Crankcase Assy. | 8U9-11400-00-00 | OEM | U | 175 | 2 |
| Crankcase Assy. Parts | 8U9-11400-00-00 | OEM | U | 50 | 2 |
| Piston 1.5mm w/pin & bearing | 2304P6 | Wiseco sleeved | U | 30 | 2 |
| Piston w/rings, pin & bearing | 2304PS | Wiseco chrome | U | 20 | 1 |
| Piston w/rings# 2884CD | 2304P1 | Wiseco sleeved | N | 45 | 1 |
| Piston w/rings# 2874CDM,pin & c clips | 2304PS | Wiseco chrome | N | 50 | 1 |
| Piston w/rings,pin 0.50mm CD | 2335P2 | Wiseco sleeved | U | 10 | 2 |
| Piston w/rings# 2894CD 73.50mm | 2304P2 .020 | Wiseco sleeved | N | 50 | 2 |
| Top end gasket kit 2 base 2 o-ring | 1258 091258 | After market LLP | N | 20 | 3 |
| Piston rings 2ea. std. Chrome bore | R09-816 | A.M. Kimpex | N | 10 | 20 |
| Fuel Pump | OEM | U | 4 | ||
| Radiator | 8M6-12460-00-00 | OEM | U | 25 | 3 |
| Water Temp Meter | 8X6-83590-00-00 | OEM | U | 25 | 2 |
| Recoil pull starter | 8M6-15710-04-00 | OEM | U | 40 | 3 |
| Case, Starter | 8M6-15711-04-00 | OEM | U | 10 | 2 |
| Airbox | 8A8-13555-01-00 | OEM | U | 15 | 4 |
| Clutch guard | 8M6-77311-02-00 | OEM | U | 10 | 3 |
| Gas Tank | 8M6-24111-01-00 | OEM | U | 30 | 2 |
| Secondary Clutch | Complete | OEM | U | 25 | 2 |
| Exhaust Pipe Assy. L | 8U9-14610-00-00 | OEM | U | 45 | 2 |
| Exhaust Pipe Assy. R | 8U9-14620-00-00 | OEM | U | 45 | 1 |
| 2ND Silencer, Muffler | 8U9-14640-00-00 | OEM | U | 20 | 2 |
| Nut, Ring Exhaust Flange | 8U9-14612-00-00 | OEM | U | 5 | 6 |
| Nut, Ring Exhaust Flange w/Rings | 888-14633-00-00 | OEM | U | 15 | 4 |
| Drive Belt | 8M6-17641-00 | OEM | N | 25 | 3 |
| Drive Belt | TMX 1080 | Dayco | N | 22 | 3 |
| Drive Belt | MAX1080 | Dayco | U | 5 | 2 |
| Drive Belt | 125-4616 | Dayco ULTIMAX | U | 5 | 1 |
| Drive Belt | 1080 | Dayco | U | 5 | 1 |
| Oil pump Red Dot | 8X6-13100-00 | OEM | N | 50 | |
| Oil pump | 8X6-13100-00 | OEM | U | 20 | 4 |
| Oil Tank | 8M6-21751-00-00 | OEM | U | 10 | 3 |
| Chain Case | OEM | U | 15 | 3 | |
| Chain Case Cover | OEM | U | 10 | 3 | |
| Secondary shaft (Jackshaft) w/Rotor | OEM | U | 15 | 3 | |
| Struts T.S.S. 83-86 Damper | 8L9-22401-00-00 | OEM | U | 15 | 6 |
| Struts T.S.S. 87 up | OEM | U | 20 | 2 | |
| Struts T.S.S 87 up | 08-160 | Kimpex Pro-Gold | N | 25 | 10 |
| Struts T.S.S. Springs 83-91 | 90501-75612-00 | OEM | U | 10 | 6 |
| Strut cover steel right side Holder | 8M6-2377J-00-00 | OEM | U | 10 | 5 |
| Strut cover steel left side Holder | 8M6-2376J-01-00 | OEM | U | 10 | 5 |
| Strut Black plastic Emblem T.S.S. | OEM | U | 10 | 4 | |
| Strut chrome plastic Emblem T.S.S. | OEM | U | 10 | 6 | |
| Strut black plastic cover for T.S.S. | 8M6-77554-00-00 | OEM | U | 10 | 6 |
| Bracket, 1 (L.H) (1983-86) | 8L9-2376E-00-00 | OEM | U | 12 | 4 |
| Bracket 2 (R.H) (1983-86) | 8L9-2377E-00-00 | OEM | U | 12 | 4 |
| Arm, Front 1 | 8M6-2382E-00-00 | OEM | U | 10 | 6 |
| Arm, Front 2 | 8M6-2382F-00-00 | OEM | U | 10 | 6 |
| Hood 1 Left | 8M6-21982-00-00 | OEM | U | 15 | 4 |
| Hood 2 Right | 8M6-21983-00-00 | OEM | U | 15 | 4 |
| End Bumper plastic | 8M6-77523-00-00 | OEM | U | 5 | 8 |
| Rubber Protector 1 Left Middle | 8M6-77551-01-00 | OEM | U | 20 | 4 |
| Rubber Protector 1 Right Middle | 8M6-77552-00-00 | OEM | U | 20 | 4 |
| Protector 6 Left Plastic | 8R9-77556-00-00 | OEM | U | 15 | 3 |
| Protector 7 Right Plastic/Steel | 8M6-77557-00-00 | OEM | U | 15 | 3 |
| Strut rubber cap top | 8M6-77553-00-00 | OEM | U | 5 | 8 |
| Front Bumper Aluminum | OEM | U | 10 | 5 | |
| Front Bumper Shroud rubber | 8M6-77510-00-00 | OEM | U | 35 | 4 |
| Rear bumper aluminum | 8M6-77541-00-00 | OEM | U | 20 | 3 |
| Rear bumper Cover | 8M6-77542-00-00 | OEM | U | 15 | 5 |
| Rear bumper Left | 8M6-77543-00-00 | OEM | U | 10 | 5 |
| Rear bumper Right | 8M6-77544-00-00 | OEM | U | 10 | 5 |
| SPEEDOMETER ASSY (J) | 80N-83500-40-00 | OEM | U | 25 | 2 |
| PAD, Steering Speedometer Cover | 8L8-23815-01-00 | OEM | U | 15 | 3 |
| Handlebars Column, Steering | 8U9-23811-00-00 | OEM | U | 10 | 3 |
| Lever Throttle Assy | 84M-82720-00-00 | OEM | U | 20 | 2 |
| Suspension Wheel Smallest | 8H8-47320-00-00 | OEM | U | 8 | 10 |
| Suspension Wheel | 87M-47320-00-00 | OEM | U | 10 | 10 |
| Suspension Wheel | 8U7-47320-00-00 | OEM | U | 14 | 10 |
| Suspension Wheel Largest | 81K-47530-00-00 | OEM | U | 16 | 10 |
| Idler Shaft | 8L1-47461-00-00 | OEM | U | 10 | 10 |
| Wide Kit Materials and instructions | Ask ! | Bender | U | 40 | 10 |
| 81 SRX 440 E | |||||
| Service Manual 3 ring binder | 8M6-28197-10 | Copy of OEM | 25 | ||
| Crank Case | OEM | U | 30 | 1.5 | |
| Exhaust pipe set Set | OEM | U | 50 | 2 | |
| Cylinder Head | 8M6 | OEM | U | 45 | 2 |
| Cylinder Chrome 80%+ | 8M6 | OEM | U | 125 | 2 |
| Cylinder Chrome 75%+ | 8M6 | OEM | U | 100 | 1 |
| Cylinder Sleeved Std. | 8M6 | OEM | U | 65 | 1 |
| Ring | 8M6-11611-00 | 0EM | N | 25 | 1 |
| Piston w/pin & ring | 009-8023 | After market | U ? | 35 | 1 |
| Piston w/pin, bearing & ring | 54315 | Aftermarket Y.C.P. | N | 45 | 1 |
| Piston w/pin & ring | 009-8023 | After market | U | 10 | 1 |