The Infamous 1983 Pump Drive Gear seal for the water pump !
The Infamous 1983 Pump Drive Gear seal for the water pump !
Ok, guys there has to be an answer to this........ ? Yamaha went from a single oil seal in 1983 on the Pump Drive Gear Assembly #93103-25133-00 to a dual oil seal setup in 1984 #93101-25121-00 and #9313-25146-00. They changed the Bearing from #93306-00401-00 (B6004) to the 1984 version #93316-00403-00. The only other change I noticed is the Water Pump Impeller Shaft went from a 1983 # 8M6-12458-01-00 to a 1984 #8X6-12458-00-00
Last edited by Vmax540 on Thu Mar 13, 2008 9:15 am, edited 1 time in total.
https://www.youtube.com/watch?v=PFb6NU1giRA
"I prefer dangerous freedom over peaceful slavery." Thomas Jefferson
"I prefer dangerous freedom over peaceful slavery." Thomas Jefferson
-
- Posts: 6
- Joined: Fri Dec 14, 2007 6:57 pm
- Location: Mishicot WI
Solution!
The following is from chuck,
Here is what I found at my local bearing dealer. We can use 2 double seals(back to back) on the water pump collar instead of the single seal (#3)which is no longer available from Yamaha.
![Image](http://www.postimage.org/PqdgOr0.jpg)
![Image](http://www.postimage.org/aVynfcJ.jpg)
Here is what I found at my local bearing dealer. We can use 2 double seals(back to back) on the water pump collar instead of the single seal (#3)which is no longer available from Yamaha.
![Image](http://www.postimage.org/PqdgOr0.jpg)
![Image](http://www.postimage.org/aVynfcJ.jpg)
My airbox is held on by one screw, not because Im lazy but because it is less weight!
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
Erie Bearings Company
http://www.eriebearings.com/
Yamaha Part #'s and Qty.
93306-0040 Bearing (B6004) 1ea.
93103-25133-00 1ea.
93102-20070-00 1ea.
Erie Bearing (TCM DICHTOMATIK) Part#, Qty. and Price
010-6004 2RS 1ea. $15.34
420-25X42X7TC 2ea. $3.60
420-20X30X7TC 1ea. $4.69
Total With Out Shipping ! $28.86
Top picture is New parts bottom is old.
![Image](http://www.postimage.org/PqqHPiA.jpg)
http://www.eriebearings.com/
Yamaha Part #'s and Qty.
93306-0040 Bearing (B6004) 1ea.
93103-25133-00 1ea.
93102-20070-00 1ea.
Erie Bearing (TCM DICHTOMATIK) Part#, Qty. and Price
010-6004 2RS 1ea. $15.34
420-25X42X7TC 2ea. $3.60
420-20X30X7TC 1ea. $4.69
Total With Out Shipping ! $28.86
Top picture is New parts bottom is old.
![Image](http://www.postimage.org/PqqHPiA.jpg)
https://www.youtube.com/watch?v=PFb6NU1giRA
"I prefer dangerous freedom over peaceful slavery." Thomas Jefferson
"I prefer dangerous freedom over peaceful slavery." Thomas Jefferson
-
- Posts: 105
- Joined: Fri Apr 13, 2007 5:54 pm
- Location: Sault Ste. Marie Ont.
Infamous Water Pump Housing - !Update!
Fellas,
I also found replacement seals to be used in place of the discontinued seal. An old vendor of my father's machine rebuild shop, W.C. Ducomb in Detroit. He recommended I use a Chicago Rawhide seal of the dimensions needed. I stated that the TCM seal was a high volume cheapy seal, that wears easily based on it's all rubber construction. The Chicago Rawhide version is metal construction with a rubber lip. He also added that having two seals back to back could offer a space to pack with grease as well.
I will forward the part numbers when I receive my order.
Thanks to the Forum for getting me this far.
Steve
I also found replacement seals to be used in place of the discontinued seal. An old vendor of my father's machine rebuild shop, W.C. Ducomb in Detroit. He recommended I use a Chicago Rawhide seal of the dimensions needed. I stated that the TCM seal was a high volume cheapy seal, that wears easily based on it's all rubber construction. The Chicago Rawhide version is metal construction with a rubber lip. He also added that having two seals back to back could offer a space to pack with grease as well.
I will forward the part numbers when I receive my order.
Thanks to the Forum for getting me this far.
Steve
Re: lucky find
ive always thought that was kinda weird to... richy rich people must be trailering way northagfirecat wrote:i wouldnt think they would carry sled parts in the carolinas
My airbox is held on by one screw, not because Im lazy but because it is less weight!
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
Re: lucky find
the seal is for an 81 im not sure if it will fit a 540 or not but he has 2 more left on ebayagfirecat wrote:i found this new old stock seal on ebay it was in north carolina at a dealeri wouldnt think they would carry sled parts in the carolinas
[img]htt
p://img34.imageshack.us/img34/2907/36306777.jpg[/img]
under 440 srx parts
Last edited by agfirecat on Tue Jun 30, 2009 6:17 pm, edited 1 time in total.
gearcase seal
im gonna def try to get to booneville this year but ive gotta score a trailer before then so i can bring both my sleds .jeff here is the item # for the seal 370219737505 . they are oem seals i should snag another 1 seeing they are no longer available ![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
F.Y.I.
YAMAHA SRX440 VMX540G PUMP DRIVE GEAR OIL SEAL NOS OEM
http://cgi.ebay.com/ebaymotors/YAMAHA-S ... 06.c0.m245
![Image](http://www.postimage.org/Ts25nAZ0.jpg)
http://www.plaistowpowersports.com/ecba ... 5JPMQ856R0
YAMAHA SRX440 VMX540G PUMP DRIVE GEAR OIL SEAL NOS OEM
http://cgi.ebay.com/ebaymotors/YAMAHA-S ... 06.c0.m245
![Image](http://www.postimage.org/Ts25nAZ0.jpg)
http://www.plaistowpowersports.com/ecba ... 5JPMQ856R0
https://www.youtube.com/watch?v=PFb6NU1giRA
"I prefer dangerous freedom over peaceful slavery." Thomas Jefferson
"I prefer dangerous freedom over peaceful slavery." Thomas Jefferson