Page 2 of 2
Re: 86 Vmax Resto
Posted: Tue Nov 24, 2015 10:48 am
by mathis
Found new crank bearings. Until the engine is rebuilt i have lots of work left on the frame.
Started grinding rust from the frame.
There are lots of great info on that thread, but not the particular info i was after. namely what Koyo/SKF bearing fits the crank....
Re: 86 Vmax Resto
Posted: Fri Mar 04, 2016 2:43 am
by mathis
What bushing is supposed to be on the pivot arms?
There is some slop without any bushing.
Re: 86 Vmax Resto
Posted: Tue Mar 22, 2016 1:34 pm
by mathis
Anyone?
Re: 86 Vmax Resto
Posted: Wed Mar 23, 2016 6:58 pm
by Bob Vehring
Sorry, I got Pol. extra 10's in mine. Should be easy enough to turn up on a lathe if you can't find them
Re: 86 Vmax Resto
Posted: Thu Apr 14, 2016 1:41 am
by mathis
I have two shims on the oil pump, how many shims are you using on your oil pump?
Re: 86 Vmax Resto
Posted: Sat Dec 17, 2016 5:28 am
by mathis
Where is this band supposed to be?
Re: 86 Vmax Resto
Posted: Sat Dec 17, 2016 7:13 am
by mathis
Unsure about the wiring for the hand warmers. There is a yellow/black and a black wire coming from the wire harness. The hand warmers connectors are all black.
Any suggestion how this is supposed to be connected?
Re: 86 Vmax Resto
Posted: Mon Dec 19, 2016 1:18 am
by mathis
This forum seems very dead... But i found out through my pictures the rubber bands are for the external gas sylinder on the skid shock.
The yellow/black wire is for left hand warmer.
Re: 86 Vmax Resto
Posted: Mon Jan 16, 2017 8:45 am
by Vmax540
viewtopic.php?f=2&t=1529 Look at (-handwarmer installation)