Need Help With a Big Bore 540
Posted: Fri Nov 06, 2009 11:39 am
hello... i bought some vmax 540 parts off of ebay and im looking for anytype of info on them.... i know they are "big bore" parts and some where near 4mm over bore... the head has been milled to lower the compression (or keep it the same after the increase in bore) the cylinders have polished intake and exhaust "runners" and a decent amount of "smoothing" on the transfer ports.... it doesnt appear that the transfer ports were moved or made any bigger... im just looking for any info i can get....
there are some stampings on them head and cylinders as you can see from the pics
this number is hard to read in the picture... i believe it says "8776"
these numbers are pretty easy to read when you click on the picture and make it bigger... it says "SSR 332" and below that "84"
also if anyone knows where i can get "big bore" pistons to fit this please let me know...
thanks
there are some stampings on them head and cylinders as you can see from the pics
this number is hard to read in the picture... i believe it says "8776"
these numbers are pretty easy to read when you click on the picture and make it bigger... it says "SSR 332" and below that "84"
also if anyone knows where i can get "big bore" pistons to fit this please let me know...
thanks