Wiseco ring gap.
-
- Posts: 4
- Joined: Wed Dec 04, 2013 9:23 pm
Wiseco ring gap.
Hi. Rebuilding a 86 540. Standard bore, Steel sleeved with Wiseco piston's & CD ring's. I gapped the ring's at 0.012. Am I good to go or should I open them up to 0.014? Thank's.
-
- Posts: 222
- Joined: Mon Mar 03, 2008 12:08 pm
Re: Wiseco ring gap.
DO YOU HAVE SERVICE MANUAL. I WOULD GO WITH STOCK SPEC IF THIS IS STANDARD BORE.3:16 (YAMMIE TONY)
Re: Wiseco ring gap.
https://www.youtube.com/watch?v=PFb6NU1giRA
"I prefer dangerous freedom over peaceful slavery." Thomas Jefferson
"I prefer dangerous freedom over peaceful slavery." Thomas Jefferson
-
- Posts: 4
- Joined: Wed Dec 04, 2013 9:23 pm
Re: Wiseco ring gap.
Thanks. I opened them up to .014 as per service manual. I was not sure as Wiseco info called for .004 per 1" bore. Breakin happen's Sunday afternoon I hope. Waiting for snow.
Re: Wiseco ring gap.
Wiesco = let it warm up good Before to much flipper.
https://www.youtube.com/watch?v=PFb6NU1giRA
"I prefer dangerous freedom over peaceful slavery." Thomas Jefferson
"I prefer dangerous freedom over peaceful slavery." Thomas Jefferson
-
- Posts: 4
- Joined: Wed Dec 04, 2013 9:23 pm
Re: Wiseco ring gap.
I hear you on that. Don't want to smoke a new top end. Snowed but not enough. Can't wait!!!!
-
- Posts: 222
- Joined: Mon Mar 03, 2008 12:08 pm
Re: Wiseco ring gap.
5 minute idle time works wonders. 3:16
-
- Posts: 4
- Joined: Wed Dec 04, 2013 9:23 pm
Re: Wiseco ring gap.
Started last weekend for break-in. Starving for fuel. Forgot to replace fuel line's in tank from fitting's to filter. Replaced & Ran it like I stole it for 3 mile's. Run's great. No leak's. Alot of snow coming Saturday night. Time to RIDE!