I am a new member to this site and ill have to say i love it. I have a 83 that is about 50% restored and i just picked up a 86 for 100 bucks. The 86 was almost 100% percent complete with a motor that had 125 on each cylinders but beat up pretty bad. I figure the motor is worth 100 bucks. Upon tear down i found that the bulkhead is bent bad so now im looking for a good bulkhead/tunnel. I live in southeast michigan but i noticed alot of you guys are from PA. My brother lives in York PA so he could pick up a frame for me. If ya have anything please let me know...
Thanks again
chad
robertsraffus@aol.com
1986 vmax frame/tunnel (wanted)
Re: 1986 vmax frame/tunnel (wanted)
Check with ?
Username:
mrviper700
Location:
Brookfield, Ohio
Username:
mrviper700
Location:
Brookfield, Ohio
https://www.youtube.com/watch?v=PFb6NU1giRA
"I prefer dangerous freedom over peaceful slavery." Thomas Jefferson
"I prefer dangerous freedom over peaceful slavery." Thomas Jefferson
-
- Posts: 61
- Joined: Thu Jan 31, 2008 4:42 pm
- Location: Brookfield, Ohio
Re: 1986 vmax frame/tunnel (wanted)
sorry, I dont have one.
RPM-Technologies- 2 stroke engine performance
Re: 1986 vmax frame/tunnel (wanted)
I have two but I'm in SE WI. Quite a hike.
opsled
opsled