Rear bumper covers

Bob Vehring · Post by **Bob Vehring** » Sun Nov 22, 2009 2:11 pm

Are there just 3 pieces or is there end caps that went on the back part. I have two sides and a rear piece, the rear looks like either someone cut the ends at a 45 deg angle, or maybe there's some end caps I don't have. What I have now leaves the edges exposed

opsled · Post by **opsled** » Sun Nov 22, 2009 6:21 pm

3 pieces Bob. Your's must be cut.

opsled

Post by **Vmax540** » Tue Nov 24, 2009 9:59 am

F.Y.I.

http://cgi.ebay.com/ebaymotors/YAMAHA-N ... ccessories

Bob Vehring · Post by **Bob Vehring** » Tue Nov 24, 2009 12:44 pm

Thanks, but wow 90 bucks for a piece of plastic

velocity · Post by **velocity** » Tue Nov 24, 2009 1:46 pm

Hey Bob,

Give Al's snowmobile a call. I got one for my 86 three years ago and it was only like $25.00... worth a phone call..

George

Bob Vehring · Post by **Bob Vehring** » Tue Nov 24, 2009 10:44 pm

My other yammi is a "81 srv which had a different tunnel. In '83 they switch to what looks to be this style. So my question is are all these the same, VM, SRV, Phazors ect ?

opsled · Post by **opsled** » Thu Nov 26, 2009 8:56 am

All these rear bumper components on Vmax 540's, 83 and up SRV's and late XLV's carry the same 8M6 "81 SRX" prefix and part #'s in online Yamaha parts books. So the answer is Yes, they can be found on these other models. Phazers were different.

Good Luck,

Phil (opsled)

Bob Vehring · Post by **Bob Vehring** » Thu Nov 26, 2009 9:09 am

Thanks Phil

VintageVmax.com

Rear bumper covers

Rear bumper covers

Bumper