Mod 1988 Vmax 540 Bits wtb
- Argento102
- Posts: 5
- Joined: Wed Nov 26, 2014 8:37 am
Mod 1988 Vmax 540 Bits wtb
Hi Guys, recently acquired '88 Vmax. Looking for a big bore kit.
Anybody have one?
Cheers,
Arg
Anybody have one?
Cheers,
Arg
Strapping a Pratt & Whitney J52 loaded w/ TriEthylBorane will make it a
bit faster ya...
bit faster ya...
Re: Mod 1988 Vmax 540 Bits wtb
i have some big bore cylinders i would love to sell you! they come with a free broken piston. but sadly thats all i know about them... i can measure them if you want... I would take $100 plus shipping for both of them plus the head. I havent looked at that box in quite some time
My airbox is held on by one screw, not because Im lazy but because it is less weight!
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
Re: Mod 1988 Vmax 540 Bits wtb
Tyler If he doesn't want them please let me know, I will take them!! Thanks
JEFFERY M FOURNIER
SLEDS
83 VMAX 540
81 SRX 440
SLEDS
83 VMAX 540
81 SRX 440
Re: Mod 1988 Vmax 540 Bits wtb
i think ill run up to chucks this evening and try to get a picture of these for you guys.... i would like to see them gone, i could use the money to fill my sled up with gas haha hoping i have a head to go with them... in which case ill want more $$ of course....
My airbox is held on by one screw, not because Im lazy but because it is less weight!
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
Re: Mod 1988 Vmax 540 Bits wtb
here are the pictures... still havent heard anything from the original poster
I roughly measured the cylinder and it was 78.8mm i believe (hopefully chuck can verify this)
also one cylinder had a very small scratch that i could just barely catch a nail on, i think it could be removed very easy...
I havent came up with the broken piston yet, but i think i know where it is and truthfully it is basically just a paper weight. I already called the company that made it and then have no record
$100 plus shipping (updated since i also have the head)
I roughly measured the cylinder and it was 78.8mm i believe (hopefully chuck can verify this)
also one cylinder had a very small scratch that i could just barely catch a nail on, i think it could be removed very easy...
I havent came up with the broken piston yet, but i think i know where it is and truthfully it is basically just a paper weight. I already called the company that made it and then have no record
$100 plus shipping (updated since i also have the head)
My airbox is held on by one screw, not because Im lazy but because it is less weight!
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
- Argento102
- Posts: 5
- Joined: Wed Nov 26, 2014 8:37 am
Re: Mod 1988 Vmax 540 Bits wtb
tyler440 wrote:i have some big bore cylinders i would love to sell you! they come with a free broken piston. but sadly thats all i know about them... i can measure them if you want... I would take $100 plus shipping for both of them plus the head. I havent looked at that box in quite some time
Tyler, can you get a USPS shipping quote to:
24 John St
Port Hope Ontario
L1A 2Z2
thanks man
Darren
Strapping a Pratt & Whitney J52 loaded w/ TriEthylBorane will make it a
bit faster ya...
bit faster ya...
- Argento102
- Posts: 5
- Joined: Wed Nov 26, 2014 8:37 am
Re: Mod 1988 Vmax 540 Bits wtb
Argento102 wrote:tyler440 wrote:i have some big bore cylinders i would love to sell you! they come with a free broken piston. but sadly thats all i know about them... i can measure them if you want... I would take $100 plus shipping for both of them plus the head. I havent looked at that box in quite some time
Tyler, can you get a USPS shipping quote to:
24 John St
Port Hope Ontario
L1A 2Z2
thanks man
Darren
**Sorry for the late reply, it didn't notify me until just today wow.
Strapping a Pratt & Whitney J52 loaded w/ TriEthylBorane will make it a
bit faster ya...
bit faster ya...
Re: Mod 1988 Vmax 540 Bits wtb
i will work on this... need to weigh and measure and probably go to the post office for an accurate quote. gimmie a couple of days
My airbox is held on by one screw, not because Im lazy but because it is less weight!
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
Re: Mod 1988 Vmax 540 Bits wtb
ok so i went to the post office yesterday, they tell me that shipping is the same to anywhere in canada. The package in the smallest box I could manage measures 12"x10"x7" and weighs 17lbs. They tell me shipping to Canada is $68. Let me know what you think of that. I can ship it as soon as tomorrow with paypal payment. My paypal address is tylerochs@hotmail.com
for the 2nd and 3rd in line people, you can estimate shipping to you, my address is... Lucinda, PA 16235 (i assume that would be enough info)
for the 2nd and 3rd in line people, you can estimate shipping to you, my address is... Lucinda, PA 16235 (i assume that would be enough info)
My airbox is held on by one screw, not because Im lazy but because it is less weight!
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
Re: Mod 1988 Vmax 540 Bits wtb
These parts are sold...
My airbox is held on by one screw, not because Im lazy but because it is less weight!
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
Re: Mod 1988 Vmax 540 Bits wtb
did you receive your parts yet? i miss placed the tracking number, and im sort of curious if they made it yet
My airbox is held on by one screw, not because Im lazy but because it is less weight!
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com