85' Vmax Pump Drive Gear O-Ring Specs??

Get your questions answered here! Also be courteous and answer any you may know. Its a give and take kinda thing, we think you'll enjoy!
Post Reply
KylejSmith
Posts: 7
Joined: Wed Apr 15, 2015 1:48 am

85' Vmax Pump Drive Gear O-Ring Specs??

Post by KylejSmith »

Looking for the Specs of the Pump Drive Gear O-Ring. I've been to a few O-Ring shops and they can't seem to match it, anyone have a # I could give them to speed this up?

Thanks,
User avatar
Vmax540
Posts: 1521
Joined: Thu Jan 26, 2006 8:36 pm
Location: Shippenville Pa.
Contact:

Re: 85' Vmax Pump Drive Gear O-Ring Specs??

Post by Vmax540 »

Which o-ring ?
Attachments
20150814114337164.pdf
(63.8 KiB) Downloaded 280 times
https://www.youtube.com/watch?v=PFb6NU1giRA
"I prefer dangerous freedom over peaceful slavery." Thomas Jefferson
KylejSmith
Posts: 7
Joined: Wed Apr 15, 2015 1:48 am

Re: 85' Vmax Pump Drive Gear O-Ring Specs??

Post by KylejSmith »

The large one that goes around the whole housing.
KylejSmith
Posts: 7
Joined: Wed Apr 15, 2015 1:48 am

Re: 85' Vmax Pump Drive Gear O-Ring Specs??

Post by KylejSmith »

Its the one, that the "NOTE" points to, telling you to grease the O-Ring.
User avatar
vmax-540
Posts: 299
Joined: Tue Jan 31, 2006 12:34 am
Location: Ogdensburg new york

Re: 85' Vmax Pump Drive Gear O-Ring Specs??

Post by vmax-540 »

Yamaha Part # is 93211-44445-00 I have reused them as long as they are in good condition you should be OK. If you can find the right diameter seal in a roll you could always fit it in the groove with the ends at the top and put a drop of silicone on the ends. It is always best to find the original one if you can, these are just a few alternatives for you if you can't..
JEFFERY M FOURNIER

SLEDS
83 VMAX 540
81 SRX 440
Post Reply