Mod 1988 Vmax 540 Bits wtb

Use this area to buy and sell your vintage sleds and parts!
Post Reply
User avatar
Argento102
Posts: 5
Joined: Wed Nov 26, 2014 8:37 am

Mod 1988 Vmax 540 Bits wtb

Post by Argento102 »

Hi Guys, recently acquired '88 Vmax. Looking for a big bore kit.
Anybody have one?

Cheers,

Arg :lol:
Strapping a Pratt & Whitney J52 loaded w/ TriEthylBorane will make it a
bit faster ya...
vmaxkid
Posts: 55
Joined: Mon Dec 31, 2012 4:54 pm

Re: Mod 1988 Vmax 540 Bits wtb

Post by vmaxkid »

good luck man
User avatar
tyler440
Posts: 692
Joined: Tue Jan 24, 2006 12:47 am
Location: Clarion, PA
Contact:

Re: Mod 1988 Vmax 540 Bits wtb

Post by tyler440 »

i have some big bore cylinders i would love to sell you! they come with a free broken piston. but sadly thats all i know about them... i can measure them if you want... I would take $100 plus shipping for both of them plus the head. I havent looked at that box in quite some time
My airbox is held on by one screw, not because Im lazy but because it is less weight!

Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
User avatar
vmax-540
Posts: 299
Joined: Tue Jan 31, 2006 12:34 am
Location: Ogdensburg new york

Re: Mod 1988 Vmax 540 Bits wtb

Post by vmax-540 »

Tyler If he doesn't want them please let me know, I will take them!! Thanks
JEFFERY M FOURNIER

SLEDS
83 VMAX 540
81 SRX 440
User avatar
tyler440
Posts: 692
Joined: Tue Jan 24, 2006 12:47 am
Location: Clarion, PA
Contact:

Re: Mod 1988 Vmax 540 Bits wtb

Post by tyler440 »

i think ill run up to chucks this evening and try to get a picture of these for you guys.... i would like to see them gone, i could use the money to fill my sled up with gas haha hoping i have a head to go with them... in which case ill want more $$ of course....
My airbox is held on by one screw, not because Im lazy but because it is less weight!

Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
User avatar
tyler440
Posts: 692
Joined: Tue Jan 24, 2006 12:47 am
Location: Clarion, PA
Contact:

Re: Mod 1988 Vmax 540 Bits wtb

Post by tyler440 »

here are the pictures... still havent heard anything from the original poster

I roughly measured the cylinder and it was 78.8mm i believe (hopefully chuck can verify this)

also one cylinder had a very small scratch that i could just barely catch a nail on, i think it could be removed very easy...

I havent came up with the broken piston yet, but i think i know where it is and truthfully it is basically just a paper weight. I already called the company that made it and then have no record

$100 plus shipping (updated since i also have the head)
Attachments
IMG_20141208_210821_608.jpg
IMG_20141208_210516_895.jpg
IMG_20141208_210555_024.jpg
IMG_20141208_210616_206.jpg
IMG_20141208_210640_326.jpg
IMG_20141208_210737_345.jpg
My airbox is held on by one screw, not because Im lazy but because it is less weight!

Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
User avatar
Argento102
Posts: 5
Joined: Wed Nov 26, 2014 8:37 am

Re: Mod 1988 Vmax 540 Bits wtb

Post by Argento102 »

tyler440 wrote:i have some big bore cylinders i would love to sell you! they come with a free broken piston. but sadly thats all i know about them... i can measure them if you want... I would take $100 plus shipping for both of them plus the head. I havent looked at that box in quite some time

Tyler, can you get a USPS shipping quote to:

24 John St
Port Hope Ontario
L1A 2Z2

thanks man

Darren
Strapping a Pratt & Whitney J52 loaded w/ TriEthylBorane will make it a
bit faster ya...
User avatar
Argento102
Posts: 5
Joined: Wed Nov 26, 2014 8:37 am

Re: Mod 1988 Vmax 540 Bits wtb

Post by Argento102 »

Argento102 wrote:
tyler440 wrote:i have some big bore cylinders i would love to sell you! they come with a free broken piston. but sadly thats all i know about them... i can measure them if you want... I would take $100 plus shipping for both of them plus the head. I havent looked at that box in quite some time

Tyler, can you get a USPS shipping quote to:

24 John St
Port Hope Ontario
L1A 2Z2

thanks man

Darren

**Sorry for the late reply, it didn't notify me until just today wow.
Strapping a Pratt & Whitney J52 loaded w/ TriEthylBorane will make it a
bit faster ya...
User avatar
tyler440
Posts: 692
Joined: Tue Jan 24, 2006 12:47 am
Location: Clarion, PA
Contact:

Re: Mod 1988 Vmax 540 Bits wtb

Post by tyler440 »

i will work on this... need to weigh and measure and probably go to the post office for an accurate quote. gimmie a couple of days
My airbox is held on by one screw, not because Im lazy but because it is less weight!

Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
User avatar
tyler440
Posts: 692
Joined: Tue Jan 24, 2006 12:47 am
Location: Clarion, PA
Contact:

Re: Mod 1988 Vmax 540 Bits wtb

Post by tyler440 »

ok so i went to the post office yesterday, they tell me that shipping is the same to anywhere in canada. The package in the smallest box I could manage measures 12"x10"x7" and weighs 17lbs. They tell me shipping to Canada is $68. Let me know what you think of that. I can ship it as soon as tomorrow with paypal payment. My paypal address is tylerochs@hotmail.com

for the 2nd and 3rd in line people, you can estimate shipping to you, my address is... Lucinda, PA 16235 (i assume that would be enough info)
My airbox is held on by one screw, not because Im lazy but because it is less weight!

Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
User avatar
tyler440
Posts: 692
Joined: Tue Jan 24, 2006 12:47 am
Location: Clarion, PA
Contact:

Re: Mod 1988 Vmax 540 Bits wtb

Post by tyler440 »

These parts are sold...
My airbox is held on by one screw, not because Im lazy but because it is less weight!

Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
User avatar
tyler440
Posts: 692
Joined: Tue Jan 24, 2006 12:47 am
Location: Clarion, PA
Contact:

Re: Mod 1988 Vmax 540 Bits wtb

Post by tyler440 »

did you receive your parts yet? i miss placed the tracking number, and im sort of curious if they made it yet
My airbox is held on by one screw, not because Im lazy but because it is less weight!

Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
Post Reply