Where are you located Swen?
I have a nice 2300 mile 85 engine I could probably part with.
opsled
Search found 214 matches
- Sun Sep 16, 2012 6:16 pm
- Forum: *New* Vintage Classifieds
- Topic: 540
- Replies: 3
- Views: 2653
- Sat Sep 08, 2012 9:05 pm
- Forum: *New* Vintage Classifieds
- Topic: parting out a 81 srx
- Replies: 3
- Views: 2739
Re: parting out a 81 srx
I just listed one on ebay.xxxbuck19xxx wrote:Used Rear shock?
Blaine
306-531-8916 in Saskatchewan Canada
http://www.ebay.com/itm/190724324234?it ... m=&vxp=mtr
Nice shape.
opsled
- Fri Sep 07, 2012 4:53 pm
- Forum: *New* The Garage
- Topic: 1981 SRX
- Replies: 6
- Views: 3432
Re: 1981 SRX
Here are some pics. 81K (1986) case. Waterpump, seals, bearings, etc are all GOOD. It currently has a 540 bearing and seal for the crank in it (both are good). Will come with a dipstick and oil pump gasket. Will need the gasket between it and the engine (still available). This will bolt onto an 81 4...
- Tue Sep 04, 2012 2:35 pm
- Forum: *New* The Garage
- Topic: 1981 SRX
- Replies: 6
- Views: 3432
Re: 1981 SRX
Common problem. Engine has to come out to fix. Entire mag/gear housing must come off and be dissassembled to check for other damage. Antifreeze in the gearcase takes out the gears and their bearings quickly. Rust can destroy all the parts in there and the case. The mag end crank seal can also get wr...
- Sun Jul 22, 2012 4:03 pm
- Forum: *New* My Project
- Topic: 1983 V-Max 540...
- Replies: 6
- Views: 7088
Re: 1983 V-Max 540...
Preaty sure I have all the gears/bearings if you need them. A leaky water pump has ruined more than one of these 540 Max's.
First thing I check on any 540 I look at is the gear case oil. If there is antifreeze in it the sled must get real cheap before I'm interested.
Cool sleds though.
opsled
First thing I check on any 540 I look at is the gear case oil. If there is antifreeze in it the sled must get real cheap before I'm interested.
Cool sleds though.
opsled
- Fri Jul 20, 2012 6:36 pm
- Forum: *New* The Garage
- Topic: Oh Crap Here We Go...
- Replies: 4
- Views: 2594
Re: Oh Crap Here We Go...
What are you buildin man??
Cranks are pricey on these things and parts are getting hard to come by. I have parts and may be able to set you up with what you need.
Give my a call at 262-716-3368.
Phil
Cranks are pricey on these things and parts are getting hard to come by. I have parts and may be able to set you up with what you need.
Give my a call at 262-716-3368.
Phil
- Sun May 20, 2012 10:50 am
- Forum: *New* Vintage Classifieds
- Topic: 1981 SRX 440 top end
- Replies: 0
- Views: 1854
1981 SRX 440 top end
Complete stock top end for 1981 SRX 440. This came off a sled I bought that was stuck do to a rusty water/oil pump drive gearcase caused from sitting with a bad water pump seal. The inside of the crankcase was clean and sled had a little over 1100 miles on it. The chrome cylinders, pistons and head ...
- Wed May 16, 2012 4:33 pm
- Forum: *New* The Garage
- Topic: COMET YELLOW CLUTCH SPRING # 203475A
- Replies: 7
- Views: 3460
Re: COMET YELLOW CLUTCH SPRING # 203475A
Yea, Thanks Jeff.
Sorry Tony, been chasing my tail here and that sled I have with one is 4 deep back in the corner of the barn. Just havn't had the time to dig it out.
I'm glad Jeff got you one.
Phil (opsled)
Sorry Tony, been chasing my tail here and that sled I have with one is 4 deep back in the corner of the barn. Just havn't had the time to dig it out.
I'm glad Jeff got you one.
Phil (opsled)
- Tue Apr 17, 2012 9:14 pm
- Forum: *New* The Garage
- Topic: COMET YELLOW CLUTCH SPRING # 203475A
- Replies: 7
- Views: 3460
Re: COMET YELLOW CLUTCH SPRING # 203475A
Is that the square wire yellow one Tony??
If so I have one on an 81 up in the barn. Would have to dig it out and get it off.
Phil
If so I have one on an 81 up in the barn. Would have to dig it out and get it off.
Phil
- Mon Apr 16, 2012 10:03 am
- Forum: *New* The Garage
- Topic: Witch carb is left which is right?
- Replies: 2
- Views: 2000
Re: Witch carb is left which is right?
Look on the front (engine side) of the choke plunger boss of the carbs. Should be stamped 81K-00L (left side PTO carb) and 81K-00R (right side recoil side carb).
opsled
PS, The 81K is the prefix for the 86 Vmax. In other years that would be different but the 00L and 00R still designates right/left.
opsled
PS, The 81K is the prefix for the 86 Vmax. In other years that would be different but the 00L and 00R still designates right/left.
- Tue Apr 10, 2012 9:26 am
- Forum: *New* The Garage
- Topic: Help bleeding my new oil lines to prime the system?
- Replies: 2
- Views: 2211
Re: Help bleeding my new oil lines to prime the system?
There is a bleed screw on the pump next to the pump's inlet port (phillips head, faces the right side of sled). With oil in the tank and some rags stuffed under the pump remove the screw. It will allow air to escape and prime the pump. The rags will catch the oil as it purges the air from the system...
- Fri Apr 06, 2012 10:16 am
- Forum: *New* The Garage
- Topic: Need some help with oil line replacement
- Replies: 3
- Views: 2127
Re: Need some help with oil line replacement
Great I will definitely go with the OEM yellow and yes I was about to use fuel line. Thanks again Opsled this is the second issue you have helped me with this week and it is greatly appreciated. :D No problem, I've gotten my share of help myself over the years. Gotta give ta get (lol) On OEM line. ...
- Fri Apr 06, 2012 8:12 am
- Forum: *New* The Garage
- Topic: Need some help with oil line replacement
- Replies: 3
- Views: 2127
Re: Need some help with oil line replacement
The line with the filter is the supply line. The other is return. Only the supply needs to be filtered. The supply line should go from the port on the tank that is closest to the right side (larger port) of the sled and to the port on the pump that is closest to the bleed screw (small phillips head ...
- Thu Apr 05, 2012 2:53 pm
- Forum: *New* The Garage
- Topic: Need help with nozzle identification?
- Replies: 9
- Views: 3896
Re: Need help with nozzle identification?
Cool,,,
Got it runnin yet??
opsled
Got it runnin yet??
opsled
- Thu Apr 05, 2012 12:37 pm
- Forum: *New* The Garage
- Topic: Need help with nozzle identification?
- Replies: 9
- Views: 3896
Re: Need help with nozzle identification?
YAMMIEGOD 3:16 wrote:YES, THAT SMALL CASE VENT ELBOW. YES PLEASE IF YA HAVE A EXTRA. I KNOW YOU HAVE MY ADDRESS. 3:16 (YAMMIE TONY)
On it's way Big guy.
opsled