VintageVmax.com

ANYTHING YOU HAVE. LET ME KNOW WHAT I OWE YA. 3:16 (yammie tony)

JEFF, GREAT POST. I HAD MINE 100 % STRIPED AND TODAY I RIPED IT AROUND MY HOUSE WITH NO ANTI FREEZE LEAKING IN GEAR CASE. I HAD GERRY MURPHY ,s 1997 VMAX 4 800 HERE TO SO I WAS BUSY. ANYWAYS I ALSO MADE AFEW JETTING CHANGES PER UPDATED PORTING SPEC. AS FARR AS THANKING YAMAHA, I DOUBT THERE IS ANYBO...

PHIL I NOTICE THAT ON MY 83, BUT THIS GAUGE BROKE WHERE NUT SCREWS INTO HOUSING. OTHER ONE I HAD WAS FROM A 87 SCALE COLOR SCREEN, THAT WAS BROKE TOO. USED HOT WATER FROM MICR WAVE. lol. if ya can spare a good one, let me know. hey i sent that vmax 4 stuff back to ya. 3:16 (yammie tony)

I NEED A GOOD WORKING WATER TEMP GAUGE FOR A 83-87 VMAX. DON,T CARE ABOUT FACE (numbers or scale) HAVE TWO HERE AND THEIR BOTH JUNK. LET ME KNOW. 3:16 (yammie tony)

PHIL, i am gonna throw this post right back. those sleds that lost to that old 78 srx with the vmaxx motor was because they were not clutched right. if they were, no way. 3:16 (YAMMIE TONY)

OK GUYS, LAST FALL I BOUGHT COMPLETE UPDATED 1986 HOUSING FROM PHIL (opsled) HE HAD ON E BAY. I CAN POST TONIGHT ITS DONE. IT WAS A LITTLE BIT OF A JOB, BASICALLY HARD PART WAS GETTING OLD HOUSING OFF. FOR THE MOST PART THE ORIGINAL HOUSING HAD LITTLE DAMAGE. SEAL LOOKED GOOD, BUT ANTI FREEZE LEAKIN...

PHIL, YA LEFT OUT THE VMAX IS ALSO A OLD SLED, I USE MINE LIKE ITS A OLD CAR, ALTHOUGH ITS FUN TO GO FAST. 3:16 (yammie tony)

JEFF REALLY RUNS HARD. THINGS HAPPEN FOR REASON. SLED WILL BE DONE RIGHT NOW. 1. LOWER GEAR CASE FIXED. 2. UNDERNEATH ENGINE CLEANED. 3 SLED WILL BE REJETTED AND SOME PRE-MIX WITH FUEL. I WAS GONNA OMIT OIL INJECTION, BUT NOW I AM GONNA LEAVE IT. I HAVE SOME STUFF FOR YOU. SEE YA AT THE WHITEOUT. 3:16

OIL INJECTION RESVIOUR LINES TO OIL INJECTION Pump. NEED TO KNOW WHAT LINE GOES WHERE ON PUMP. lmfao. going in circles here. 3:16

THANKS PHIL. YOUR MAG HOUSING IS GOING ON, GOOD RIDDANCE TO THAT PROBLEM. WOW, THATS REALLY BAD. I GUESS MOST 83,s DID THAT. anyways i am right on the fence i may run oil injection and pre-mix alittle back up. can you post a picture here of the oil pump hook-up to resvior for me. 3:16 (yammie tony)

PHIL, THATS A POSSIBILITY. IT WAS MAG SIDE. YOUR HOUSING GOING BACK ON THIS . SO THAT WILL BE FIXED. EVERYTHING APART AND THE SEAL LOOKED GOOD. WHO KNOWS. IF I KEEP THE OIL PUMP, I WILL ALSO BACK UP SOME PRE-MIX. I WOULD LIKE TO GO TO PRE-MIX THOUGH. YOU HAVE ANY EXTRA OF THOSE pump covers. I HAVE A...

BOB, I HAVE TO TELL YA, EVERY HOT ROD SLED YAMAHA MADE BACK THAN SHOULD OF STAYED PRE-MIX. I HAVE UPDATED PORTING TO MY 83, AND THEY HAD RICHER OIL PUMP, BUT TECH MANUAL SAYS ON A 84 BACKUP OIL PUMP WITH 50:1 PREMIX WITH THE PORTING UPDATE. ITS DONE, NOW OF CORSE THE OIL INJECTION CABLE CAN BE OMITT...

MY 83 VMAX WAS FLYING THIS WEEKEND AND POWER FELL OFF AND ENGINE DROPED ONE CYL. COMPRESSION SHOWED 60 psi. SLED WAS WAY TOO LEAN AND IT SQUEAKED. VERY LUCKY NO DAMAGE TO JUG. NOW, ITS TIME TO THIS RIGHT. FIRST I AM GONNA FIX LEAKING GEAR CASE. THAN I AM GOING TOTALLY OLD SCHOOL HERE WITH BACK TO PR...

grass raced with out the air box chuck lol. 3:16 (YAMMIE TONY)

MY GUESS IS BELT, OR SPEED-O BEARING. BUT TAKE YOUR SECONDARY AND MOVE IT BACK AND FORTH, IF ITS EXCESSIVE, ITS IN YOUR CHAINCASE. AND STOP RIDING THIS THING, THE NOISE WON,T GO AWAY RIDING IT. 3:16 (yammie tony)