VintageVmax.com

I think that this is the best website for vintage VMAX's & SRX's with that said ,the question I have ,is ,I wish someone would send in some pictures of the 82 SRX 500 and maybe do an article about the differences between this sled and the 81& 83s , like the pipes , carbs and tune up specs, ...

Here are two 102s that you can put on ,you will just have to realign the clutchs but that will not be a problem . And you will also have to use the vmax spring and weights.The first part# is 208300A that is the one for 1980 SRX, 80-90 SRV , and 81&82 SRX and others. The second is part # 208306A...

I think that any of the cat secondarys with the exception of maybe the big twins will work.But you will have to change the jackshaft on you SRX because the cat and polaris have a 1" shaft with a keyway and your SRX has a spinded shaft, the shaft you need is getting hard to come by but i think ...

That is common with the 84 's to have a broken stator . Try to get one from an 85 or 86. There was a stator change in 84 , they are differant then the 83's , they have a extra coil for hand warmers , and the plate was week so in 85 they changed to a stronger plate and that solved the problem. The 87...

I am looking for a tool pouch & tools for an 81 srx ,srv ,or ss 440 the Yamaha part # is 8K2-28100-10 the 1982 may also be the same . If any one has one please let me know and also how much it will cost. Thanks

Here are some more pictures of the project. http://upload4.postimage.org/1347010/81SRX440RestoreSept2006009.jpg http://upload4.postimage.org/1347059/81SRX440RestoreSept2006010.jpg http://upload4.postimage.org/1347162/81SRX440RestoreSept2006011.jpg http://upload4.postimage.org/1347178/81SRX440Restore...

Here are some pictures of my 81 SRX 440 project. I purchased the sled last winter, I drove it a little bit last winter and it ran very strong so I knew that I had a good starting point.After I stripped all the paint off the tunnel ,hood,and side panels, I fixed the brake in the hood and straightened...

Dennis It sounds like the trottle cable is not set right and it is holding one or both carbs from returning to normal idel , that is why it revs so high. That will also cause it to start hard when cold . Also The 83s trottle cable was a little to short , and this would cause this also, if you look, ...

I think the problem that everyone is having with the 108s is the installed height of the spring.Comet says in there manual that the spring has a installed height of 2 3/8 inches and a full shift or totaly compressed height of 11/8 inches with the 102s that is the case ,but with the 108s , they measu...

The 83 vmax 's had an optional sway bar kit avalible and I also believe the 81 srx had the same . I am not sure but I think it was the one Tim Bender developed. Hope this helped .The Yamaha part # is 8u9-w0051-00-00. Jeff F

It sounds like it is in good shape , but I think it mite be out of my price range but you never know. I am looking for one that I can restore . If you deside to sell it please let me know how much you want for it . My phone # is 315 393 2870 I am in Ogdensburg New York. Please let me know . Thanks J...

I am looking for an 81 srx 440 any condition I would prefer one that needs some work . I would like to stay close to New York state as this is where I am from and i could travel to pick it up. You can email me at fournier2870@yahoo.com. Thanks jeff f.

How much are you asking for the 81 srx as I am looking for one. How much would you take it and the extra parts. Also where are you located. You can email me at fournier 2870@yahoo.com . Thanks jeff.f