Search found 226 matches

by Joe
Mon Aug 30, 2010 2:49 am
Forum: *New* Vintage Classifieds
Topic: Want to buy one mid 80's XLV skid frame
Replies: 0
Views: 1613

Want to buy one mid 80's XLV skid frame

I am currently using two VMAX skid frames in my half track snow rail (http://www.youtube.com/watch?v=Gyun4WAS37c) and need to carry the weight higher. Both VMAX shocks are full tight and the bottoms of the tunnels are still unacceptably close to the ground. If you watch the video at 4:10 it shows ho...
by Joe
Mon Aug 30, 2010 2:09 am
Forum: *New* The Garage
Topic: 83 vmax 540...electric start?
Replies: 5
Views: 2693

Re: 83 vmax 540...electric start?

I have a 540 XLV (air cooled) engine that has the ring gear on the magneto rotor.
I have no idea if they (ring gear and rotor) can be mounted on the 540 liquid cooled engine.
Is there enough room for a ring gear in that area?
by Joe
Mon Aug 30, 2010 1:57 am
Forum: *New* Snow Conditions
Topic: Fresh snow in August
Replies: 0
Views: 3714

Fresh snow in August

We got fresh snow 27 August in the Washington Mountains above 7000 feet. It stuck for three days. http://www.nohrsc.noaa.gov/interactive/html/graph.html?station=MU101_MADIS&w=600&h=400&uc=0&by=2010&bm=8&bd=20&bh=11&ey=2010&em=8&ed=29&eh=11&data=0&u...
by Joe
Wed Apr 14, 2010 3:14 am
Forum: *New* Snow Conditions
Topic: Winter is back!
Replies: 8
Views: 7196

18 inches of fresh snow during the first week of April and another 20 inches the second week.

We had some more snow adventures the last two weekends.

Video is posted on YouTube under user VMX540FAN.
by Joe
Wed Apr 07, 2010 3:28 am
Forum: *New* My Project
Topic: Snowrail made with VMAX parts
Replies: 10
Views: 5352

Washington mountains got another couple feet of snow the last two weeks and we got some more seat time in the Half Track Snow Rail. This time we went up to Stampede Pass and Tacoma Pass. The snow was powder in the shadows and Peanut butter in the sun. We ran 38 miles before it started getting dark a...
by Joe
Thu Apr 01, 2010 2:11 am
Forum: *New* Snow Conditions
Topic: Winter is back!
Replies: 8
Views: 7196

We put another 40 miles on the Half Track Snow Rail today at the same location as my co-workers went on Friday. There was 12 inches of new snow on top of the ice they reported. We shot some video and I will post the links on the Half Track thread in the projects forum. The snow was either Peanut but...
by Joe
Mon Mar 29, 2010 3:23 am
Forum: *New* Snow Conditions
Topic: Receding snowline
Replies: 2
Views: 4440

Forecast for this week follows: -------------------------------------------------------------------------------------------------- Tonight...Breezy. Rain and snow. Snow level 4500 feet. Snow accumulation 4 to 8 inches. Southeast wind in the passes near 10 mph increasing to 15 to 20 mph after midnigh...
by Joe
Mon Mar 29, 2010 3:17 am
Forum: *New* Snow Conditions
Topic: Receding snowline
Replies: 2
Views: 4440

The snow line was the same as last weekend. There was four inches of new snow in the pass and 12 inches reported on the top of Pyramid Peak. The snow gets pretty wet in the afternoons and then freezes again at night.
by Joe
Mon Mar 29, 2010 3:14 am
Forum: *New* My Project
Topic: Snowrail made with VMAX parts
Replies: 10
Views: 5352

It snowed Thursday night and we got some more seat time in the Half Track Snow Rail. Video and story lines are at: http://www.youtube.com/watch?v=BYKMYcnU-ko and http://www.youtube.com/watch?v=Gyun4WAS37c Does anyone have any ideas on were to get stronger coil springs for the VMAX rear shock? The tr...
by Joe
Wed Mar 24, 2010 8:14 pm
Forum: *New* My Project
Topic: Snowrail made with VMAX parts
Replies: 10
Views: 5352

The ski will return to bottom center when traveling below walking speed. Above walking speed, it continues to spin until I slowed down below walking speed. I have the fiberglass panels for the top, sides and over my legs. Installation is required. The heater parts are here. It is to help dry out the...
by Joe
Wed Mar 24, 2010 11:55 am
Forum: *New* My Project
Topic: Snowrail made with VMAX parts
Replies: 10
Views: 5352

More and better video posted at:

http://www.youtube.com/watch?v=tpyHU2_Fits
and
http://www.youtube.com/watch?v=YAYxSq2Qzb8

The first collection of clips is Rich driving.
The second collection of clips is me driving using the front tires without skis.
by Joe
Sun Mar 21, 2010 10:54 am
Forum: *New* Snow Conditions
Topic: Receding snowline
Replies: 2
Views: 4440

Receding snowline

We parked at 4100 feet up Naches pass yesterday. The first quarter mile was slush over ice. By 4500 feet, the trail was covered three feet deep with corn snow. It was like riding a snow cone. When we got up to 5000 feet, there was two inches of heavy wet snow on top of the corn snow. http://s2.posti...
by Joe
Sun Mar 21, 2010 2:34 am
Forum: *New* My Project
Topic: Snowrail made with VMAX parts
Replies: 10
Views: 5352

Yes, we had fun. Yes, things bent and fell off, but nothing broke. We shot about 40 video sequences today. Some successfully and others not so well. I picked one of them and posted it at: http://www.youtube.com/watch?v=KRsgY0Eoh0A I will post more video sequences as I trim them before posting. The b...
by Joe
Fri Mar 19, 2010 3:18 am
Forum: *New* My Project
Topic: Snowrail made with VMAX parts
Replies: 10
Views: 5352

We installed new rear wheel bearings and got the rear axles aligned today. http://s2.postimage.org/aYFjA.jpg YouTube video is at: http://www.youtube.com/watch?v=cP1_BEtZR0k If you look at the video, you can see that the axles support significantly more weight and stay pointed in the right direction ...
by Joe
Mon Mar 15, 2010 7:28 pm
Forum: *New* My Project
Topic: Snowrail made with VMAX parts
Replies: 10
Views: 5352

Fuel injected Ecotec 2.2 liter twin cam out of a Pontiac Sunfire.